DC Motor Zogo 68S-RA/CW DC24V-150W 7000rpm 

• High torque, low noise, double ball bearing beads lathe, earthworm opener.
• Front and rear double bearings, no axial movement, low sound; 24V 150W at maximum load, no-load speed 7000rpm (plus or minus 5% error).
• The motor is a carbon brush motor with a normal life span of about 1500 hours;
• It can be forward and reverse and speed regulation, forward and reverse can be realized by changing the input direction of the DC transformer or adding a positive and negative switch; speed regulation can be changed with a speed regulator, but when the speed is reduced, the power will also be reduced.
• Because the power is large and the starting current is large, it is recommended to use a 24V battery or a 24V high-power transformer. If the transformer power is insufficient, it will stop when encountering a load.

Parameter

• Voltage: 24V (DC)
• Speed: 7000rpm 
• Power: 150W 
• No-load current: 0.5A Work Current: 3-4A Blocking current: 8A
• Working temperature: 0-75 degrees
• Net weight: 1 kg

Notice

• The motor is a 24V DC high-power motor, and a transformer above 24V3A is required (Instead of switching power supply).
• Before use, be sure to check the connection line for short circuit or poor contact, so as not to affect the use.